Brother MFC-J6710DW Driver

Posted on

Brother MFC-J6710DW Driver – The Brother MFC-J6710DW is a big multifunction printer, but after that, that is a foregone conclusion for anything that can spew out A3 pages; the need of both keeping and moving A3 paper through a paper feed system means that there is a limitation for miniaturization that is feasible with any A3 printer model.

Brother MFC-J6710DW Driver

FilenameOperating SystemSize
Full Driver & Software PackageWindows127.67 MBdownload
Printer DrivermacOS (10.15)18.00 MBdownload
Printer DrivermacOS (10.14)18.05 MBdownload
Printer DrivermacOS (10.13), macOS (10.12)18.26 MBdownload
LPR printer driver (deb package)Linux3.06 MBdownload

How to Install Brother MFC-J6710DW Driver

  • Visit the printer’s official website, or click the link directly below this post.
  • Then select the Operating System (OS) by use or need.
  • Then select the driver to be downloaded.
  • Once downloaded, open the location of the driver file and then extract it (if necessary).
  • Connect the printer’s USB cable to your device (computer or laptop) and make sure it is fully connected.
  • Open the driver file and start running.
  • Follow the instructions to complete.
  • After everything is complete, make sure to restart (if necessary).
  • Finish.

Brother MFC-J6710DW Review

Brother MFC-J6710DW Driver – At 540x489x257mm and 15kg with no paper packed right into it, it is a strong piece of printer that’ll need both a sensible quantity of work desk space and a reasonably strong set of table legs to support it.

The front display consists of fax and copies that flank a pop-up color 3.3-inch LCD, multi-card reader, and USB port for direct printing access. Underneath, you will find two flexible paper trays. The basic design isn’t anything fussy, but after that, a printer of this dimension is never mosting likely to appear like anything but a printer anyhow.

Features

The MFC-J6710DW belongs to Brother’s professional line-up of A3 color inkjet multifunction; for AU$50 much less, you could choose the MFC-J6510DW; the chief distinction there’s that you bypass the lower paper tray. Or you could select the top-of-the-line MFC-J6910DW, which also enables A4 automated double-sided scanning, copying, and faxing; that model will set you back at AU$479.

The MFC-J6710DW is an A3 printer/scanner/photocopier/fax multifunction center from a base specs viewpoint. Brother chooses to advertise its print rates in a strange blend of pictures each min (ipm) and web pages (ppm) numbers.

Other Driver: Brother HL-L2390DW Driver

Brother MFC-J6710DW Driver – Our testing tends ipm numbers, which are more dependable in real-world testing, whereas ppm numbers tend towards the over-inflated. The MFC-J6710DW is ranked for 12ipm in mono and 10ipm in color with normal coverage and up to 35ppm for mono prepare and 27ppm for color prepare web pages.

The scanner is a CIS kind with an optical resolution of 2400x2400dpi, interpolated up to 19,200×19,200. OIt’llconnect up via USB 2.0, 10/100 Ethernet, and 802.11b/g/n wireless. on the connectivity front

Efficiency

Establishing the MFC-J6710DW involves the usual process of removing little bits of blue tape and installing cartridges, just on a somewhat bigger range because of the MFC’s bigger physical dimension.

The review box sent out to us kept in mind that it evaluated a touch over 20kg — it may help have a colleague help you set it up. One benefit of the bigger body is that the four ink cartridges (black, cyan, yellow, and magenta) are installed via a side slot; there is no mucking about lifting the large scanner tray.

The tester found that the MFC-J6710DW was a bit picky about properly spotting new cartridges. Cyan, particularly on our review model, was twitchy; it took us about fifty percent a lot of attempts before the MFC-J6710DW would certainly concur that it remained in truth installed.

When you first load A3 paper, you will also discover that despite the bigger dimension of the MFC-J6710DW, it will not accommodate A3 pieces without the paper tray jutting out 13cm from the main unit body.

It is not an awesome invasion for a unit of this dimension, but well worth bearing in mind when setting the MFC up, as it will not be in shape comfortably right into smaller-sized locations with A3 paper installed. Both paper trays that the MFC-J6710DW comes with are a certain benefit, and it is quite easy to set the paper dimension for each tray straight from the printer itself.

Print quality for color and black-and-white documents completely coverage was quite crisp, although predictably, picture prints aren’t especially outstanding with just a three-color ink cartridge set up. Regarding print speed, with the complete range, we could print a solitary entire coverage text web page in approximately 28.3 secs.

On each min basis, we balanced 4ppm. Switching to prepare didn’t do a lot to improve speed issues, with a solitary web page appearing at approximately 24.3 secs and 5ppm total. The distinction between prepare and normal coverage was quite noticeable; unless you had to economize on ink, the speed distinction is so limited that the tester recommends normal printing coverage anyhow.

Switching to A3 printing predictably didn’t speed issues up, with a solitary black-and-white A3 web page taking approximately 1:35 to arise and a comparable color web page taking 1:38.

Brother MFC-J6710DW FULL Driver from Brother Website.