Fujitsu Scansnap S1300i Driver

Posted on

Fujitsu Scansnap S1300i Driver – For all it does, Fujitsu’s ScanSnap S1300i is remarkably small, and it packs a useful user interface and document management software. It is ideal for moderate document scanning when driving if you can stomach the price.

Fujitsu Scansnap S1300i Driver

FilenameOperating SystemSize
ScanSnap Home Download Installer 2.4.0Windows52.75 MBdownload
Software Downloads: ScanSnap S1300iMac OSClick here

Or Fujitsu Scansnap S1300i FULL Driver directly from Fujitsu Website.

How to Install Fujitsu Scansnap S1300i Driver

  • Visit the printer’s official website, or click the link directly below this post.
  • Then select the Operating System (OS) by use or need.
  • Then select the driver to be downloaded.
  • Once downloaded, open the location of the driver file and then extract it (if necessary).
  • Connect the printer’s USB cable to your device (computer or laptop) and make sure it is fully connected.
  • Open the driver file and start running.
  • Follow the instructions to complete.
  • After everything is complete, make sure to restart (if necessary).
  • Finish.

Fujitsu Scansnap S1300i Review

Fujitsu Scansnap S1300i Driver – Fujitsu’s ScanSnap S1300i ($295) is a mobile document scanner designed primarily to digitize documents when driving. A straight rival to our Editors’ Choice, the Epson WorkForce ES-300W evaluated here in April 2017; the S1300i is fast for its dimension and accuracy.

Plus, it comes with Fujitsu’s durable, easy-to-use ScanSnap scanning user interface and document management software. But the ES-300W has held its position as our top pick amongst mobile document scanners for greater than three years—a testimony to its outstanding design, efficiency, and feature set.

That is not to say that the Fujitsu isn’t a good little device; to say that in regards to capacity and efficiency, the Epson sides it as our favourite multi-sheet-feed mobile document scanner.

Scanning the Roadway In advance

Fujitsu Scansnap S1300i Driver – Before our deep-dive right into the S1300i itself, it is necessary to explain an important difference between both various kinds of mobile document scanners: manual-feed (or single-sheet-feed) and multi-sheet-feed.

Manual-feed scanners, such as, say, Epson’s DS-80W, approve and scan just one web page each time (however, most of them can catch both sides of two-sided web pages immediately). To scan several web pages, you need to feed them to the device one by one.

Other Driver: Fujitsu ScanSnap S1500 Driver

The ScanSnap S1300i and various other multi-sheet-feed devices, consisting of the Epson ES-300W mentioned previously and its cheaper brother or sister, the ES-200, come with automated document feeders (ADFs). An ADF device can press and catch a small pile of web pages without user treatment.

With today’s Fujitsu, that number is just ten web pages or 20 pictures (sides). But fortunately is that the S1300i comes with two scanning sensing units, one for each side of the paper, enabling it to catch both sides simultaneously.

Such as most mobile document scanners, this does not have a lot of an onboard control board. In truth, all you truly obtain is a Scan switch that also acts as a condition LED. It shifts through red, green, and blue-lit specifies to indicate various condition settings.

Almost all aspects of setting up and managing the scanner are handled via the ScanSnap software bundle. Connection is composed entirely of a USB 2.0 information port. The S1300i can, however, obtain power from either AC or USB.

Fujitsu Scansnap S1300i Driver – In truth, there is a USB-to-power cable television consisted of in package. You can also run both power and information connections from the same computing device, but with a spin: Your PC or Mac must have two available USB ports. In various other words, information and power aren’t sustained at the same time over the same cable television.

Initially glimpse, this looked like a strange setup, but it made good sense after considering it for a minute. Most scanners that support power and information on one USB cable television, by doing so, forfeit the ability to trade information with most portable tablet computers and mobile phones.

Few portable mobile devices attract and store enough amperage to power up themselves and a scanner. To makeup, the S1300i allows you to terminate up the scanner via AC power and at the same time trade information over USB. The just various other alternatives for scanning for your mobile phone is either Wi-Fi or a peer-to-peer wireless procedure, such as Wi-Fi Direct, Bluetooth, or Mopria.

Of the various other portables mentioned here until now, just the ES-300W supports wireless connection, as do a couple of others, such as Apparent’s Doxie Q and IRIScan’s Anywhere 5, as well as several manual-feed portables.

But that’s not the just feature that has assisted the ES-300W keep its regime as our favourite multi-sheet-feed portable; the Epson is also among few devices in this section that comes with an integrated battery, which allows you to run it almost anywhere without being tethered to a computer system or a source of power. Epson’s DS-320 also comes with a battery, but it does not support wireless links.

Finally, most scanners come with an everyday duty cycle quantity score, which is the manufacturer’s recommended maximum number of checks to avoid unnecessarily enduring the device. Alas, Fujitsu hasn’t already released a responsibility cycle for the S1300i.

However, most multi-sheet-feed portables (consisting of the ES-300W and its siblings) are ranked at 500 checks. On a device equipped with a rather miserly 10-page ADF (or one with a 20-page feeder), undergoing a complete ream of paper in simply someday is instead enthusiastic.

Fujitsu Scansnap S1300i Driver

Fujitsu Scansnap S1300i Driver and Software FREE Download for Windows 10, Windows 7, etc (32-bit, 64-bit), Mac OS and Linux.

Price Currency: USD

Operating System: Windows, Mac OS, Linux

Application Category: Drivers Software

Editor's Rating:
5