Epson BrightLink 425Wi Driver FREE -The Epson BrightLink 425Wi Projector is a WXGA Conference Room Projector. This light centred projector can show 2,500 Lumens at its brightest setting with an indigenous resolution of 1280×800. Epson BrightLink 425Wi Driver for Windows 10, Windows 8/ 8.1, Windows 7, Vista, Windows XP (32bit – 64bit), Mac OS and Linux OS.
Epson BrightLink 425Wi Review
The interior 3LCD technology is an innovative 3-chip design that sets itself apart by providing vibrant, true-to-life pictures with better colour illumination and a wider colour range. This projector was initially available for purchase in April 2012 and is ceased by Epson.
The Epson BrightLink 425Wi Interactive Projector w/ Wall surface Mount/Light is such an uncommonly effective interactions device it is hard to decide where to begin first. It is obtained 2500 lumens of illumination and a 3000:1 comparison proportion.
So, lots of forecast power is obtained to show a big bright picture in a normally lit room. The 425Wi can handle input in the NTSC, PAL and SECAM TV requirements and its 100 to 240 V AC power provide rounds out its worldwide abilities.
This projector installs on top of the same wall surface it is projecting into. It can do so just because it is an ultra-short toss projector. An ultra-short toss projector, basically, can project a bigger picture at a much shorter range from the screen compared to a traditional projector can.
Other Driver: Epson L850 Driver
Imagine the benefits of that type of configuration. You can virtually stand right under the 425Wi and not actors darkness on the screen. You’ll not need to wince from the projector’s beam radiating in your eyes either.
This projector comes with a lot of programs (both PC and Macintosh variations). Once you’ve installed the software on your computer system, you can actually write on your discussions as you provide using unique inkless interactive pens (2 pens are consisted of.). You do not need any unique type of digital whiteboards. Use a standard whiteboard, blackboard, a wall-even timber panelling in a squeeze.
In education and learning, in business, in any circumstance where you need to catch and hold your audience’s attention in a manner that is both practical and creative, you can’t do better compared to the Epson BrightLink 425Wi Interactive Projector.
System Requirements of Epson BrightLink 425Wi
Windows
- Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit, Windows XP 32-bit, Windows Vista 32-bit, Windows 2000
Mac OS
- macOS 11.x, macOS 10.15.x, macOS 10.14.x, macOS 10.13.x, macOS 10.12.x, Mac OS X 10.11.x, Mac OS X 10.10.x, Mac OS X 10.9.x, Mac OS X 10.8.x, Mac OS X 10.7.x, Mac OS X 10.6.x
Linux
- –
How to Install Epson BrightLink 425Wi Driver
- Visit the printer’s official website, or click the link directly below this post.
- Then select the Operating System (OS) by use or need.
- Then select the driver to be downloaded.
- Once downloaded, open the location of the driver file and then extract it (if necessary).
- Connect the printer’s USB cable to your device (computer or laptop) and make sure it is fully connected.
- Open the driver file and start running.
- Follow the instructions to complete.
- After everything is complete, make sure to restart (if necessary).
- Finish.
Epson BrightLink 425Wi Driver
Windows
- Easy Interactive Driver v1.10: download
Mac OS
- EasyMP Network Projection Utility v2.92: download
Linux
- –
Epson BrightLink 425Wi FULL Driver from Epson Website.