Download Canon PIXMA MX300 Driver FREE – The Pixma MX300 is Canon’s entry-level, office-oriented, all-in-one inkjet offering. At AU$179, we didn’t anticipate too a lot in regards to efficiency, but we were happily surprised: while it had not been the fastest all-in-one we’ve evaluated, it comprised for it with top quality prints and checks. Canon PIXMA MX300 Driver Download for Windows 10, Windows 8/ 8.1, Windows 7, Vista, Windows XP (32bit – 64bit), Mac OS, and
Canon PIXMA MX300 Driver
Canon PIXMA MX300 Review
It is not network-ready, so if you are in a multiperson workplace, it is not your best option, and it does not have an automated document feeder (ADF), which means set checks, duplicates, and faxes will be laborious.
If you need an ADF, look at the Lexmark X5470, and if you must have a network-ready all-in-one, the Lexmark X4550 fits the expense. Both Lexmark units will also obtain you much faster publish rates (other than with photos), but the Canon MX300 defeats the trousers off both when it comes to publishing quality.
The Canon Pixma MX300 is instead large for an affordable all-in-one. It rests 465mm wide, 440mm deep, and 174mm high, but evaluates a light 7kg. The light-grey-and-black unit does not have an automated document feeder, which is unusual for office-oriented multifunctions, but not unexpected provided its low cost.
It is the just among Canon’s workplace all-in-ones that do not offer an ADF. The scanner cover hides an A4 dimension scanner, and without an ADF, A4 is the biggest dimension initial you can check. This printer does not have sd card ports, but does offer a PictBridge-enabled USB port for PictBridge-compliant video cams, camcorders, and video cam phones.
Other Driver: Canon Pixma MX922 Driver
The paper handling is simple and simple. A paper input support unravels from the printer’s top-rear side and stands up to 100 sheets of ordinary paper. A flap folds up out of the printer’s front panel to function as the output tray.
The control board is clean and simple. A two-line text LCD is the control board’s center point, but it is not backlit, which means it is hard to read in reduced light. 3 job switches let you switch in between copy, fax, and check jobs.
A food selection switch and food selection navigating switches let you peruse your options. 2 switches are dedicated to changing copy setups and fax quality. An alphanumeric keypad and begin and quit/reset switches complete the panel. The Pixma MX300 uses a two-tank ink system: one black and one-tricolor cartridge, and Canon offers 3 dimension options for each storage container.
The Canon Pixma MX300 offers just a USB link, so it is ideal for single-user workplaces. It’s suitable with both Macs and Home windows PCs, however. The job options on this multifunction printer are standard for a design at this price point.
When copying, you can decrease/expand in between 25 percent and 400 percent. Unique copy options consist of sticker label copy, picture duplicate, 2-on-1, and 4-on-1, indeterminate, and frame remove copy. Frame remove uses in circumstances where the item being duplicated is smaller than the intended paper (a book, for instance). Rather than publishing the extra location as black, the printer disregards it, thus preventing the waste of black ink.
The walk-up check cup capacities on this printer are missing. Although the control board offers a check job switch, once you push Begin, the printer causes the MP Navigator EX software to introduce on your PC.
You will need to click the Check switch in the software actually to begin the check. However, the MP Navigator EX is a user-friendly program that allows you to change check resolution, define the kind of document you are scanning (picture, document, publication, therefore on). After that, make edits to the resulting check.
Conserve As options consist of JPEG, TIFF, BMP, and PDF, and you can choose where to conserve the file. The program also allows you to connect the checked file to an email. The one check feature the MX300 does not have is the ability to check straight right into a software application such as Paint or Word. You will need to check, conserve, and after that by hand open up the file in the program you want to use.
Although the MX300 does not have one-touch speed dials, you can sign up to 20 commonly dialed fax numbers with two-digit coded speed dials. If you can’t monitor all 20 numbers in your head, the MX300 will let you publish a listing of the registered numbers. You can’t send out fax blasts, or schedule postponed faxes on this unit — not unexpected for an entry-level multifunction.
However, you can receive faxes right into memory (i.e., store rather than publish) if you disable the auto-publish options, or if the printer runs out of ink, the paper tray is empty or has the incorrect paper in it, or if the output tray is shut. The control board will indicate that you have kept faxes in memory, and you can either publish them or publish a listing of the kept faxes.
The front-mounted USB port allows you to publish photos straight from PictBridge video cams, but as this is an office-oriented machine, we’d prefer to see support for storage space devices such as USB thumb owns.
System Requirements of Canon PIXMA MX300
- Windows 8.1(32bit), Windows 8(32bit), Windows 7(32bit), Windows Vista(32bit), Windows XP, Windows 2000 Professional.
- OS X Mavericks v10.9, OS X Mountain Lion v10.8, OS X Lion v10.7.5
How to Install Canon PIXMA MX300 Driver
- Visit the printer’s official website, or click the link directly below this post.
- Then select the Operating System (OS) by use or need.
- Then select the driver to be downloaded.
- Once downloaded, open the location of the driver file and then extract it (if necessary).
- Connect the printer’s USB cable to your device (computer or laptop) and make sure it is fully connected.
- Open the driver file and start running.
- Follow the instructions to complete.
- After everything is complete, make sure to restart (if necessary).
Or Download Software and drivers for Canon PIXMA MX300 from Canon Website.