Canon PIXMA iP6310D Driver FREE – The Canon Pixma iP6310D is a single-function picture printer that lives at the reduced finish of Canon’s photo-centric printer line. The $100 printer flaunts a pair of photo-centric features, such as media card ports and a PictBridge port for PC-free publishing. Canon PIXMA iP6310D Driver for
Windows 10, Windows 8/ 8.1, Windows 7, Vista, Windows XP (32bit – 64bit), Mac OS, and Linux OS.
Canon PIXMA iP6310D Review
Its publish rates are unequal, but its overall publish quality is pleasing, particularly for the price. If you can afford an extra $30, springtime for Canon’s MP460–you’ll obtain not just more features, such as scanning and copying, but also much faster publish rates and better quality all about.
The Pixma iP6310D’s black-and-gray body is small and light-weight. It measures 17.3 inches wide, 10.3 inches deep, and 6.8 inches high, and it evaluates a simple 7.5 extra pounds. A flap on the backside of the printer folds up back to function as the paper-input tray.
The output tray moves from the front bottom side, and an expansion flap lengthens it also further. Over the output tray is a small bar that changes the range between the published media and the printhead; maintain it to the left for most media kinds, consisting of ordinary and picture paper. A small flap on the printer available to expose 2 media card ports that approve most media card kinds (some will require an adapter).
Also mounted on the printer’s front is a USB PictBridge port that allows you to publish from PictBridge-enabled electronic still and camera. You can also connect to a Bluetooth adapter (sold individually) to publish wirelessly from Bluetooth video cams or phones.
Other Driver: Canon PIXMA iP6220D Driver
The printer is a wind to set up: place the CDs consisted of installing the driver and the software. When triggered, connect the printer and transform it on. The iP6310D supports both Home windows and Mac os via a USB link.
Mounted on the top of the printer is a small panel of switches and a two-line single LCD. Sadly, the display isn’t backlit, which could eventually show troublesome in low-light problems. Apart from the standard publish, quit/reset, and power switches are food selection and food selection navigating switches.
There are 2 special-task switches, as well: the conserve switch, identified with a folder symbol, immediately conserves the components of an inserted media card for your PC, and the various other switch introduces Canon’s Easy-PhotoPrint software, which strolls you through the actions to publishing pictures from an sd card.
The setup switch allows you to change publish setups and perform routine upkeep on the printer. The food selection switch provides options just for jobs associating with the sd card. Using the left/right toggle switch and the OK and back switches, you can browse the food selection, which includes options such as publishing a picture index, publishing all pictures, defining a variety of pictures (by number or date) or make sticker label prints.
The Pixma iP6310D uses a two-tank, six-ink system. One is a routine color storage container, while the various other is a picture color storage container. Both tanks cost $25 to change. However, the routine color ink also is available in a high-capacity storage container that costs $35.
Canon estimates that a black-and-white document costs about 9 cents each web page, while a shade web page costs about 8 cents. The black publishing cost is slightly greater than some of Canon’s various other printers in this price range, but it is most likely because it does not have black-only ink. Still, these costs are well within range (are often less expensive) compared to the competitors.
System Requirements of Canon PIXMA iP6310D
- Windows 7 32-bit, Windows 7 64-bit
- OS X 10.5/10.6/10.7
How to Install Canon PIXMA iP6310D Driver
- Visit the printer’s official website, or click the link directly below this post.
- Then select the Operating System (OS) by use or need.
- Then select the driver to be downloaded.
- Once downloaded, open the location of the driver file and then extract it (if necessary).
- Connect the printer’s USB cable to your device (computer or laptop) and make sure it is fully connected.
- Open the driver file and start running.
- Follow the instructions to complete.
- After everything is complete, make sure to restart (if necessary).
Canon PIXMA iP6310D Driver
- Printer Driver Add-On Module Ver.2.00 (Windows 7/7 x64): download
- iP6310D CUPS Printer Driver Ver. 10.51.2.0 (OS X 10.5/10.6/10.7): download
Or Download Software and drivers for Canon PIXMA iP6310D from Canon Website.